| MusiciansNews | GuitarsMusicGear | BassMusicGear | DigitalPianosKeyboards | DrumsMusicGear | SingingSongwriting | GuitarSheetMusicTabs | DJmusicEquipment | CRMAV | LiveSoundPASystems | RecordingMixingMastering |
 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturers | Behringer Peavey Samson Yamaha Roland DigiTech River String Fender Sarulean sE Electronics Korg Ibanez Gibson Hartke Alesis Shure Boss Epiphone Mackie Zoom Akai Marshall Focusrite M-Audio Vestax SKB Silvertone Novation AKG CBI Martin Nady Fostex | |||||||||||||||||||||||||||||||||||||||||||||||
| Guitar | Bass | Drum | Piano | Keyboard | Singing | Songwriting | DJ | Recording | Artists | Music Gear | Forums | Reviews | Musicians Wanted | Chords | Sheet Music | Tabs | MIDI | |||||||||||||||||||||||||||||||
|
Mackie HR626 Active Studio Reference Monitor
The HR626 is the first active Mackie studio monitor with a DAppolito woofer-tweeter-woofer design. It has one 6.7-inch woofer on each end of the cabinet with the dome tweeter in the center. The monitor can be setup vertically or horizontally, depending on the application. The 2-way bi-amplified monitor implements servo-feedback circuitry and an elliptical passive radiator to achieve low distortion and extended low-frequency response similar to the HR824. The waveguide-loaded high frequency aluminum dome tweeter provides the same crisp and evenly dispersed highs as all of Mackies world-class reference monitors. The 5/8 in. internally braced MDF cabinet is extremely rigid and non-resonant. It shares the same professional design as the other Mackie monitors the HR824 and the HR624. The HR626 is the ideal monitor for those who need lots of bottom end, along with the low-level accuracy of the mid range for mixing and vocal placement. Thanks to its DAppolito driver alignment design, the HR626 can be used in both vertical and horizontal positions. Placing the HR626 in a vertical position provides extremely accurate reference monitoring for mid-to large-sized studios. Because of its symmetrical left-right sound field, it can also be placed horizontally and used as a superior center channel in a 5.1 or 7.1 surround monitoring or home theater system. HR626 Active Studio Reference Monitor Specifications Low-Frequency Driver Number of drivers: 2 Diameter: 6.7 in. (170 mm) Sensitivity (2.83V 1m): 89 dB SPL Nominal Impedance: 8 ohms Voice Coil Diameter: 1.25 in. (32 mm) Power Handling (Long Term/Program): 50/150 watts Frequency Range: 38Hz to 6kHz Frame: Die Cast Aluminum Magnet: Ferrite Bucking Magnet (Shield): Ferrite High-Frequency Driver Sensitivity (2.83V 1m): 91 dB SPL Nominal Impedance: 6 ohms Power Handling (Long Term/Program): 20/50 watts Frequency Range: 1.6kHz to 22kHz Diaphragm/Suspension: Aluminum/Impregnated Cloth Voice Coil Diameter: 1.0 inch (25.4 mm) Magnet: Ferrite Bucking Magnet: Ferrite Wave Guide Frequency Response: 2.5kHz to 20kHz ±2dB Mouth Size: 6.13 in. diameter (156 mm) Horizontal and Vertical Coverage: 120Α ±10Α 3kHz to 20kHz Passive Radiator: 6-inch x 9-inch (152 mm x 228 mm) mass-loaded elliptical flat piston with variable thickness filleted edge rubber surround. Crossover Type: Modified Butterworth 18 dB/octave @ 1.8kHz Acoustic Section Free-Field Frequency Response: ±1.5dB 42Hz to 20kHz Lower Cutoff Frequency: -3 dB @ 40 Hz Upper Cutoff Frequency: -3 dB @ 22 kHz Sound Pressure Level at 1 Meter -7.5dbu Into Balanced Input: 100 dB SPL @ 1m Maximum Peak SPL Per Pair: 118 dB SPL @ 1m Maximum Short Term SPL on Axis Half Space 80Hz to 2.5kHz: 109 dB SPL @ 1m Residual Noise (Maximum Gain 600 Ohms Source 20hz-20khz Bandwidth): Power Consumption Standby Mode: 12 watts Quiescent (Idle): 20 watts Musical Program Loud Mix: 105 watts Both Channels Driven Into Resistive Loading to 1% Clipping (LF 86 W/4 Ohms Source 20hz-20khz Bandwidth): 255 watts US: 120 VAC 60Hz Rated Power (For UL-6500 CSA-E65-94 EN-60065): 130 watts Low-Frequency Power Amplifier Rated Power (at 1kHz with 1% THD): 100 watts Rated Load Impedance: 4 ohms Slew Rate: 15V/uS Distortion (THD SMPTE IMD DIM 100): 101 dB Cooling: Convection Design: Monolithic IC Class AB Parametric Servo Feedback High-Frequency Power Amplifier Rated Power (at 1Khz with 1% THD) 40 watts In Japan (100 VAC) 28 watts Rated Load Impedance 8 ohms Slew Rate: 15V/Us Distortion (THD SMPTE IMD DIM 100): 93 dB Cooling: Convection Design: Monolith IC Conventional Class AB Input Type: Balanced Differential (XLR and Υ in. TRS) Unbalanced (RCA) Input Impedance: 20k ohms Balanced 10k ohms Unbalanced Input Protection: RFI and Level Protected Input Sensitivity: +4 dBu @ 300Hz for full output Maximum Input Level: +20 dBu Low Cut Frequency: 80Hz 2nd Order Butterworth HF Equalization: Shelving ±2 dB @10kHz Acoustic Space: A position -4 dB @24Hz shelving B position -2 dB @ 42 Hz shelving C position flat Compressor: Independent high and low frequency overload detection Enclosure Alignment: 6th Order Over Excursion Prevention: 2nd Order High-Pass Filter Low Line Voltage Shut Down: 67% of Nominal Line Thermal Protection: Amplifier Shut Down Auto Reset Muting: 5 seconds at turn-on Signal Sense Threshold: -74 dBu (0.155mV) Driver Protection: Compressor with independent LF and HF overload detection Since Mackie is always striving to make their stuff better by incorporating new and improved materials components and manufacturing methods they reserve the right to change these specifications at any time without notice.
|
Mackie Mackie HR624 Active Reference Monitor Mackie HR626 Active Studio Reference Monitor Mackie Add Comment or Question Write a review!
| ||||||||||||||||||||||||||||||||||||||||||||||
Europe Gear Shop
| [Contact] [©1999-2008 Musiciansnews.com All rights reserved] [Advertising] |