|
|
Shure Vocal Artist Wireless Diversity System with SM58
The SM58 Vocal Artist Diversity System with SM58 Microphone offers Shure's true-to-life sound and reliability in a single, economical package. System includes: T4N Diversity Receiver with PS20 power supply, T2/58 Handheld Transmitter with SM58 Microphone, swivel adapter, carrying case, and 9V Duracell battery.
Vocal Artist Wireless Diversity System with SM58 Features
• 18 hour battery life • Low battery indicators • Noise squelch circuitry • Mute switch on the transmitter • MARCAD diversity monitors and combines signals on both receivers for outstanding reception and freedom from dropouts • XLR outputs • Connecting cables and batteries are included • Dual antennaeTechnical Description • System Includes: T4N Diversity Receiver, T2/58 Handheld Transmitter with SM58 Cadioid Microphone. • RF Carrier Frequency Range: 169.445 to 240.000 MHz (Available frequencies depend on applicable regulations in country where system is used). • Operating Range: 100 m (328 ft.) under typical conditions • Audio Frequency Response: 50 to 15,000 Hz, _ 3 dB • Image Rejection: 60 dB typical • Spurious Rejection: > 60 dB typical • System Distortion (ref. _ 15 kHz deviation, 1 kHz modula-tion): 0.1% THD typical • Signal/Noise Ratio: 101 dB • Sensitivity: -109 dBm for 12 dB SINAD typical • Battery Life: 18 hours with 9 V alkaline battery (Duracell MN1604 recommended). • T1, T1G, and T11 Bodypack Transmitter Specifications • RF Output: 50 mW typical (T1, T1G); 20 mW typical (T11) • Input Configuration: Unbalanced • Connector Type: 1/4 in. (T1G); 4-pin Tini Q-G (male) (T1) • Maximum Recommended Input Level*: +3 dBV • Minimum Recommended Input Level**: š80 dBV • Connector Pin Assignments (T1, T11): • Pin 1: Tied to Ground • Pin 2: Tied to +5 V • Pin 3: Tied to Audio • Connector Pin Assignments (T1G): • Sleeve: Tied to Ground • Tip: Tied to Audio • Dimensions, T1 and T1G (H x W x D): 64 x 106 x 24 mm (2.52 x 4.17 x .94 in.) • Dimensions, T11 (H x W x D): 83 x 64 x 26 mm (3.27 x 2.5 x 1.03 in.) • Net Weight (T1,T1G): 96.4 g (3.4 oz.) • Net Weight (T11): 79.4 g (2.8 oz.) • Power Requirements: 9 V alkaline battery (Duracell MN1604 recommended); 8.4 V NiCd battery optional. • Nominal Current Drain: 30 mA • * Gain Control at minimum • ** Gain Control at maximum • T2 Handheld Transmitter Specifications • T2/58: (SM58); T2/3: 1(BG3.1) • RF Output: 50 mW Typical (FCC); 20 mW Typical (ETSI) • Dimensions: Height 236 mm (9.29") x Depth 51 mm (2.01") • Height 222 mm (8.74") x Depth 51mm (2.01") • Net Weight: 295 g (10.4 oz.) 266 g (9.4 oz.) • Power Requirement: 9 V alkaline battery (Duracell MN1604 recom-mended); 8.4 V NiCd battery optional. • Nominal Current Drain: 30 mA 30 mA • T3 and T4N Receiver Specifications • Connector: 3-Pin XLR (Male) and 1/4" Phone Jack • Maximum Output Levels: 1/4": +5 dBV; XLR: š10 dBV; š6.8 dBV • Nominal Output Levels: 1/4": š8 dBV; XLR: š30 dBV; š32 dBV • Output Configuration: Active Balanced Unbalanced • Connector Pin Assignments: XLR: Pin 1: ground; Pin 2: hot; Pin 3: cold 1/4": Tip: hot; Sleeve: ground. Tip: hot; Sleeve: ground • Dimensions, T4N (H x W x D): 41 x 197 x 138 mm (1.625 x 7.77 x 5.42 in.) • Dimensions, T3 (H x W x D): 35 x 152 x 98 mm (1.38 x 5.98 x 3.85 in.) • Net Weight (T4N): 435 g (15.4 oz.) • Net Weight (T3): 192 g (6.8 oz.) • Power Requirements: 12š18 VDC nominal, 200mA • Power Supply: 120 V or 230V AC adapter with 2.1 mm female plug • Voltage/Current/Phantom Power Protection: Yes
|